Markets
Find Product by Alloy:
If you did not find what you were looking for, please call:
- Plate: 800-289-7528
- Sheet & CMP: 800-258-3586
- Grain-Oriented Electrical Steel: 800-289-7454
- Strip: 800-323-1240
or click here to email us
|
|
|
|
ATI Allegheny Ludlum has been a leader
in the supply of alloys for feed water
heaters and condenser tubing for
decades. As a producer of a wide range
of corrosion resistant alloys, ATI
Allegheny Ludlum can meet the
requirements of virtually any
condenser environment. The list below
offers more information on our alloys
for condensers.
|
Click to Download: AL29-4C Condenser Tubing
|
| Product Line |
Description |
Alloys |
|
|
| Nickel Alloy |
Nickel alloys offer excellent corrosion resistance to many environments, including chlorides and sulfuric acid, and are virtually immune to stress corrosion cracking.
|
ATI 22™
AL 276™
AL 400™
ALLCORR®
AL 625HP™
|
|
| Stainless Steel |
Stainless steels offer a wide range of resistance to a variety of environments. Alloys such as 304L and 316L may be used in relatively mild environments where chloride pitting is of concern. AL 2003™ lean duplex stainless steel has replaced 316L in some applications where better pitting resistance is desired. Because it has a lower content of the costly raw materials Ni and Mo, AL 2003™ alloy tubing is comparable in cost to 316L tubing. For more severe environments, the super austenitic alloys, AL-6XN® and AL 4565TM, or the super ferritic SEA-CURE® and AL 29-4C® alloys, should be used. As of 2006, there are over 25,000 km of AL 29-4C® condenser tubing in service. |
304 / 304L
316 / 316L
317 / 317L
AL 2003™
AL 2205™
AL 4565™
AL 904L™
AL-6XN Plus™
AL-6XN®
AL 29-4C®
|
|
| Titanium |
ATI Allegheny Ludlum's titanium and Ti alloys offer excellent corrosion resistance and high strength. Titanium is used for the most demanding condenser applications.
|
Grade 2
Grade 9 (3-2.5)
Grade 12
|
|
|
|
|
